Andy's LWB Zuke

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
AndyD
Got muddy boots
Got muddy boots
Posts: 30
Joined: Tue Jul 24, 2012 1:30 pm
Location: Newcastle-Upon-Tyne

Re: Andy's LWB Zuke

Post by AndyD » Fri Apr 04, 2014 1:39 pm

And then I finally ordered some wheels an tyres!
Mmmm...
Mmmm...
DSC_0479.jpg (1002.67 KiB) Viewed 6613 times
And proceeded to start my virtual lift.
1 inner arch off, time for a quick test fit;
1 inner arch off, time for a quick test fit;
DSC_0483.jpg (1.06 MiB) Viewed 6613 times
Still not too much rust under there!
Still not too much rust under there!
DSC_0484.jpg (940.41 KiB) Viewed 6613 times
Started to find where the rust was all hiding as i took off the inner arches!
Rear's not too bad. Bit worse at the front where it joins the front panel behind the headlights etc.
Sills have been replaced on this before and I was started to get think it was a bit of a bodge...
Bodge Job Sills???
Bodge Job Sills???
DSC_0485.jpg (800.12 KiB) Viewed 6613 times
On closer inspection, the main section of sill was done ok, just a bit bodged where it meets the arches. But I'm cutting this all back to do properly anyway so quite happy in the end :smokin:
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Andy's LWB Zuke

Post by ScottieJ » Fri Apr 04, 2014 1:42 pm

Good to see that you are back on it!! My next big tool purchase will be a Tig, sounds like you are having fun with it.
Zuki Build

Steady as she goes!
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Andy's LWB Zuke

Post by dan_2k_uk » Fri Apr 04, 2014 1:54 pm

Nice work dude.

Am I allowed to be jealous of the TIG...
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Andy's LWB Zuke

Post by Anton » Fri Apr 04, 2014 10:59 pm

Yes, and I'll join you...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 878
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Andy's LWB Zuke

Post by kiwizook » Sat Apr 05, 2014 12:39 am

we'll make it a club! the tig jealousy club :D

some very nice work there mate, you're welcome to come finish my sj now :D
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
User avatar
AndyD
Got muddy boots
Got muddy boots
Posts: 30
Joined: Tue Jul 24, 2012 1:30 pm
Location: Newcastle-Upon-Tyne

Re: Andy's LWB Zuke

Post by AndyD » Sat Apr 05, 2014 6:17 pm

Ha! Yes I welcome your jealousy with open arms! :hands:
TIG's definitely the coolest right? If only I could convince my wife!

But anyway, bit more progress today, and as I found out it was the most knackering job to do on your lonesome! Especially when you can't get the bloody bolts out of the rear spring eyes!! :argh:
image.jpg
image.jpg (1.54 MiB) Viewed 6578 times
image.jpg
image.jpg (1.59 MiB) Viewed 6578 times
Top
User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Andy's LWB Zuke

Post by andyrew » Sat Apr 05, 2014 6:32 pm

Ive got a front corner thats heading for the scrap
Bin I could chop it out of you want it to repair your crash
Damaged bit.
Attachments
20131231_150034.jpg
20131231_150034.jpg (2.61 MiB) Viewed 6576 times
Andys Rusty Suzuki Emporium
Top
User avatar
AndyD
Got muddy boots
Got muddy boots
Posts: 30
Joined: Tue Jul 24, 2012 1:30 pm
Location: Newcastle-Upon-Tyne

Re: Andy's LWB Zuke

Post by AndyD » Sat Apr 05, 2014 7:20 pm

That'd be awesome actually! It was going to be a pain in the ass to try and recreate all the angles nearly. I'll pm you...
Top
User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Andy's LWB Zuke

Post by donkeychomp » Sat Apr 05, 2014 10:14 pm

Nice work, but I'm wondering why new wheels have got balancing weights on them...shouldn't they be nice and round?
If it ticks over...leave it
Top
User avatar
AndyD
Got muddy boots
Got muddy boots
Posts: 30
Joined: Tue Jul 24, 2012 1:30 pm
Location: Newcastle-Upon-Tyne

Re: Andy's LWB Zuke

Post by AndyD » Sat Apr 05, 2014 11:37 pm

Nothing unusual there. New wheels generally are quite round yes, but the weights balance out the wheel and tyre assembly. Tyres are never perfectly round or balanced, may not quite sit 100% centre on the wheel, and the valve's off centre with it's hole in the wheel. All wheel/tyre assemblies should be balanced after fitting together. Even new ones.
Top
Post Reply

Return to “Builds and Projects”