not too shabby if i do say so my self 
they cost roughly 25pound to make and i had enough material to make some cards to go on the rear quarters too but i didn't put a tread pattern in those
made up a set of door cards
-
muddymesser
- Engaged 4wd low
- Posts: 189
- Joined: Mon Jun 29, 2009 9:10 pm
- Location: blackpool
made up a set of door cards
not too shabby if i do say so my self they cost roughly 25pound to make and i had enough material to make some cards to go on the rear quarters too but i didn't put a tread pattern in those
- Attachments
-
- 995257_10152059323637719_960810041_n.jpg (65 KiB) Viewed 6517 times
-
- 1493126_10152111699442719_2114652863_n.jpg (45.72 KiB) Viewed 6517 times
-
- 1486824_10152060943912719_2129114535_n.jpg (73.61 KiB) Viewed 6517 times
-
- 1551554_10152111699772719_2046693126_n.jpg (51.8 KiB) Viewed 6517 times
-
- 1601164_10152111700032719_1434141575_n.jpg (59.66 KiB) Viewed 6517 times
-
- 1530460_10152059842582719_851830384_n.jpg (116.52 KiB) Viewed 6517 times
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: made up a set of door cards
I like those.
Nice one.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
muddymesser
- Engaged 4wd low
- Posts: 189
- Joined: Mon Jun 29, 2009 9:10 pm
- Location: blackpool
Re: made up a set of door cards
thanks guys just need to work out a design for my back door next
just need to work out a design for my back door next -
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: made up a set of door cards
Chuffin' brilliant!
Wish I'd thought of it...
Wish I'd thought of it...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
Re: made up a set of door cards
that is soooo cool mate, love them. did you use a mold for cutting out the tread pattern?
It's not a question of how much you spend on your suzuki, but when your money will run out
-
muddymesser
- Engaged 4wd low
- Posts: 189
- Joined: Mon Jun 29, 2009 9:10 pm
- Location: blackpool
Re: made up a set of door cards
i just used double sided taper to hold a pattern down i printed on paper and just cut it with a stanley knife . . . i used an off cut of lino/vinyl flooring to cut the pattern into
pretty easy to make a pair of them in a night unless you use spray glue thats a bit crap
. . . spread on contact adhesive works so much better 
pretty easy to make a pair of them in a night unless you use spray glue thats a bit crap
. . . spread on contact adhesive works so much better